UK Packet Network Wiki

User Tools

Site Tools

Trace:
nodes:gb7win

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
nodes:gb7win [2025/05/14 10:02] – [LinBPQ] m0mzfnodes:gb7win [2025/06/30 10:46] (current) – [LinBPQ] m0mzf
Line 19: Line 19:
 |4| 70.4875MHz \\ 12.5KHz FM  | V Omni 0dBd 7mAGL   | - | -   | planned | | | |4| 70.4875MHz \\ 12.5KHz FM  | V Omni 0dBd 7mAGL   | - | -   | planned | | |
 |6| 50.650MHz \\ 12.5KHz FM  | V Omni 0dBd 40mAGL | 1011 QPSK 2k4 IL2P+CRC    | 13dBW 2.4KHz | active | [[nodes:gb7bdh|GB7BDH]] [[nodes:gb7rdg|GB7RDG]] |[[http://wessex.hopto.org:8070/|Wessex]] | |6| 50.650MHz \\ 12.5KHz FM  | V Omni 0dBd 40mAGL | 1011 QPSK 2k4 IL2P+CRC    | 13dBW 2.4KHz | active | [[nodes:gb7bdh|GB7BDH]] [[nodes:gb7rdg|GB7RDG]] |[[http://wessex.hopto.org:8070/|Wessex]] |
-|7| 432.650MHz \\ 12.5KHz FM  | V 180° 5dBd 7mAGL   | 0011 C4SK 9k6 IL2P+CRC | -   | licensed | [[nodes:gb7sou|GB7SOU?]] | |+|7| 432.650MHz \\ 25KHz FM  | V Omni 5dBd 7mAGL   | 0011 C4SK 9k6 IL2P+CRC | 14dBW 5KHz   | testing | [[nodes:gb7sou|GB7SOU?]] | [[http://zepler-websdr.suws.org.uk/|SUWS]] |
 =====Coverage Maps===== =====Coverage Maps=====
 Simulations from radiomobileonline; Outstation antenna 12m AGL; Strong signal 15dBuV/m, Weak Signal 3dBuV/m, Path "reliability" 95% Simulations from radiomobileonline; Outstation antenna 12m AGL; Strong signal 15dBuV/m, Weak Signal 3dBuV/m, Path "reliability" 95%
Line 33: Line 33:
   * GPIO Relays for remote power switching, Dallas 1-wire temperature sensor for radio   * GPIO Relays for remote power switching, Dallas 1-wire temperature sensor for radio
   * External 12V switched power & USB for future expansion   * External 12V switched power & USB for future expansion
 +  * 70cm: Motorola GM360 (data in / flat audio out)
   * 2m: Motorola GM380 (data in / flat audio out)   * 2m: Motorola GM380 (data in / flat audio out)
   * 6m: Alinco DR-M06TH [[https://wiki.oarc.uk/radios:dr-m06th|(modulator / discriminator tapped)]]   * 6m: Alinco DR-M06TH [[https://wiki.oarc.uk/radios:dr-m06th|(modulator / discriminator tapped)]]
-  * 2x NinoTNC A4 v3.42 firmware+  * All ports use a NinoTNC A4 v3.42 firmware
   * [[https://wiki.oarc.uk/cm108_sound_interface_smd|CM108]] on NinoTNC RX audio tap for 1k2 AX.25 decode (Direwolf 1.7)   * [[https://wiki.oarc.uk/cm108_sound_interface_smd|CM108]] on NinoTNC RX audio tap for 1k2 AX.25 decode (Direwolf 1.7)
  
 ====LinBPQ==== ====LinBPQ====
 **Version** **Version**
-<code>G8BPQ AX25 Packet Switch System Version 6.0.24.69 March 2025 (G8BPQ beta)</code> +<code>G8BPQ AX25 Packet Switch System Version 6.0.24.66 February 2025 (hibbian)</code> 
  
 **Last updated** **Last updated**
-<code>Fri 2025-05-14 10:56:03 BST</code>+<code>Mon 2025-06-09 16:33:02 BST</code>
  
 **Global** **Global**
Line 70: Line 71:
 GB7RDG,191,2 GB7RDG,191,2
  
-; Prioritise BDH on 6m +; Prioritise BDH on 2m 
-GB7BDH,192,6 +GB7BDH,192,2 
-GB7BDH,191,2+GB7BDH,191,6
  
 ; Prioritise MZF on 70cm ; Prioritise MZF on 70cm
Line 99: Line 100:
   PACLEN=236             ;bytes, 236 is max for a NETROM frame   PACLEN=236             ;bytes, 236 is max for a NETROM frame
   MAXFRAME=4             ;no., Default frames before ACK   MAXFRAME=4             ;no., Default frames before ACK
-  RESPTIME=588           ;msec, Delay time before L2 ACK (256*8)/3600=568+  RESPTIME=648           ;msec, Delay before L2 ACK (256*8)/3600=568 +80msec 
 +  RETRIES=10             ;no., L2 retries before failure
   SLOTTIME=100           ;msec, Wait time before checking PERSIST again   SLOTTIME=100           ;msec, Wait time before checking PERSIST again
   PERSIST=255            ;255/(# hidden stations on link - 1) but we can hear everyone   PERSIST=255            ;255/(# hidden stations on link - 1) but we can hear everyone
   DIGIFLAG=0             ;Don't digipeat (=1 all, =255 UI only)   DIGIFLAG=0             ;Don't digipeat (=1 all, =255 UI only)
-  QUALITY=10             ;Nodes heard on this port get this quality+  QUALITY=1              ;Nodes heard on this port get this quality
   MINQUAL=50             ;Therefore do not broadcast nodes heard on this port   MINQUAL=50             ;Therefore do not broadcast nodes heard on this port
   NODESPACLEN=160        ;Keep NODES broadcast shorter to help decode   NODESPACLEN=160        ;Keep NODES broadcast shorter to help decode
Line 125: Line 127:
   PACLEN=160             ;bytes, 236 is max for a NETROM frame   PACLEN=160             ;bytes, 236 is max for a NETROM frame
   MAXFRAME=4             ;Default no. frames before ACK   MAXFRAME=4             ;Default no. frames before ACK
-  RESPTIME=873           ;msec, Delay time before L2 ACK (256*8)/2400=853+  RESPTIME=933           ;msec, Delay time before L2 ACK (256*8)/2400=853 + 80msec 
 +  RETRIES=10             ;no., L2 retries before failure
   SLOTTIME=100           ;msec, Wait time before checking PERSIST again   SLOTTIME=100           ;msec, Wait time before checking PERSIST again
   PERSIST=255            ;255/(# hidden stations on link - 1) - but we can hear everyone   PERSIST=255            ;255/(# hidden stations on link - 1) - but we can hear everyone
   DIGIFLAG=0             ;Don't digipeat (=1 all, =255 UI only)   DIGIFLAG=0             ;Don't digipeat (=1 all, =255 UI only)
-  QUALITY=10             ;Nodes heard on this port get this quality+  QUALITY=1              ;Nodes heard on this port get this quality
   MINQUAL=50             ;Therefore do not broadcast nodes heard on this port   MINQUAL=50             ;Therefore do not broadcast nodes heard on this port
   NODESPACLEN=160        ;Keep NODES broadcast shorter to help decode   NODESPACLEN=160        ;Keep NODES broadcast shorter to help decode
Line 152: Line 155:
   MAXFRAME=8             ;Default no. frames before ACK   MAXFRAME=8             ;Default no. frames before ACK
   RESPTIME=213           ;msec, Delay time before L2 ACK (256*8)/9600=213   RESPTIME=213           ;msec, Delay time before L2 ACK (256*8)/9600=213
 +  RETRIES=10             ;no., L2 retries before failure
   SLOTTIME=20            ;msec, Wait time before checking PERSIST again   SLOTTIME=20            ;msec, Wait time before checking PERSIST again
   PERSIST=255            ;255/(# hidden stations on link - 1) - but we can hear everyone   PERSIST=255            ;255/(# hidden stations on link - 1) - but we can hear everyone
   DIGIFLAG=0             ;Don't digipeat (=1 all, =255 UI only)   DIGIFLAG=0             ;Don't digipeat (=1 all, =255 UI only)
-  QUALITY=10             ;Nodes heard on this port get this quality+  QUALITY=1              ;Nodes heard on this port get this quality
   MINQUAL=50             ;Therefore do not broadcast nodes heard on this port   MINQUAL=50             ;Therefore do not broadcast nodes heard on this port
   NODESPACLEN=160        ;Keep NODES broadcast shorter to help decode   NODESPACLEN=160        ;Keep NODES broadcast shorter to help decode
nodes/gb7win.1747216956.txt.gz · Last modified: by m0mzf
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki