Differences

This shows you the differences between two versions of the page.

--- nodes:gb7rdg [2024/08/21 15:24] – m0lte
+++ nodes:gb7rdg [2024/10/13 16:23] (current) – [GB7RDG Reading, Berkshire] ei5iyb
@@ Line 12: / Line 12: @@
 ^ Centre      ^ Pol ^ Dial for NinoTNC ^ Mode             ^ NinoTNC mode ^ Status ^
-| 7052.75 kHz | H   | 7051.25 USB      | BPSK300 IL2P+CRC | 1000 | active |
+| 7051.6 kHz | H   | 7050.1  USB      | BPSK300 IL2P+CRC | 1000 | active |
 | 50.650 MHz  | V   | 50.6485 USB      | BPSK300 IL2P+CRC | 1000 | inop (EMC issue to solve) |
 | 144.950 MHz | V   | 144.950 FM       | NinoTNC QPSK3600 IL2P+CRC   | 0101 (v39 fw) | active |
 | 432.625 MHz | V   | 432.625 FM       | G3RUH 9600 IL2P+CRC | 0010 | active |
-NB- relatively recent NinoTNC firmware required (31 or higher) - see https://github.com/ninocarrillo/flashtnc for easy process.
+NB- relatively recent NinoTNC firmware required for some modes - see https://github.com/ninocarrillo/flashtnc for easy process.
 NET/ROM enabled on VHF/UHF ports. Please keep nodes broadcasts short on 6m.
@@ Line 23: / Line 23: @@
 Packet mail region #42.GBR.EURO
-Sysop: Tom M0LTE (M0LTE@GB7RDG.#42.GBU.EURO)
+Sysop: Tom M0LTE (M0LTE@GB7RDG.#42.GBR.EURO)
 Locator: IO91lk\\
@@ Line 32: / Line 32: @@
   * Raspberry Pi 2b + Raspberry Pi OS
   * LinBPQ
-  * 4x NinoTNC
+  * 3x NinoTNC
   * 1x Tait TM8110 VHF
   * 1x Tait TM8200 UHF
   * Diamond V2000 antenna + MX2000 triplexer
-  * FT-450 for 6m
+  * Kenwood TK-90 and low wire dipole for 40m
-  * FT-450D and low wire dipole for 40m
 ===== Mail =====
-Early days, but GB7RDG presently forwards packet mail and a subset of bulletins. Broadly:
+GB7RDG provides mail service, including the bulletin feed from GB7CIP over RF.
-  * EI7IUB gets Ireland mail
-  * GB7IOW Isle of Wight is the catch-all
-  * #43.GBR.EURO -> GB7MNK via internet
-  * GB7CIP.#32.GBR.EURO and GB7WEM.#32.GBR.EURO -> GB7CIP via internet