Differences

This shows you the differences between two versions of the page.

--- aprs:mb7uba [2025/02/22 11:50] – 2e0hkd
+++ aprs:mb7uba [2025/03/19 12:13] (current) – 2e0hkd
@@ Line 1: / Line 1: @@
 ====== MB7UBA - LoRA APRS Digi/iGate ======
-MB7UBA runs APRS over LoRA, located in Basingstoke, Hampshire (IO91kg). Also now running as an experimental VHF-LoRa APRS gateway.
+MB7UBA runs APRS over LoRA, located in Basingstoke, Hampshire (IO91kg).
 Frequency: **439.9125 MHz**\\
@@ Line 9: / Line 9: @@
 This is the same frequency and parameters for LoRa based APRS across the UK.
-The VHF-LoRa gateway function means packets received on LoRa are digipeated on VHF from [[aprs:mb7ubk|MB7UBK]], and packets received on VHF are digipeated on LoRa. This cross-band digipeating is done with the "directonly" setting in APRX for the VHF side, and there are rate limits applied more stringently on the LoRa side (though normal traffic for the area is well within these limits).
 ===== LoRa APRS Background =====
@@ Line 25: / Line 23: @@
 The digi runs on a Lilygo T-Beam v1.2 with an SX1262, and uses the firmware by CA2RXU at [[https://github.com/richonguzman/LoRa_APRS_iGate]]. Tracker firmware, also by CA2RXU, for similar boards can be found at [[https://github.com/richonguzman/LoRa_APRS_Tracker]].
-There are plans to create some interaction with the packet node [[nodes:gb7bsk|GB7BSK]] which is located at the same site, so you can interact with one from the other (within some limits, no large transfers over LoRa which would swamp the frequency!)