Differences

This shows you the differences between two versions of the page.

--- nodes:gb7oxf [2024/03/22 18:47] – created m0lte
+++ nodes:gb7oxf [2024/09/07 07:18] (current) – [Technical] g6fji
@@ Line 1: / Line 1: @@
 ====== GB7OXF Abingdon, Oxfordshire ======
-Sysop: Martin G6FJI
+m BPQ node with V/UHF options under test
+^ Centre      ^ Pol ^ Dial for NinoTNC ^ Mode             ^ NinoTNC mode ^ Status ^
+| 7051.60 kHz | H   | 7051.10 USB      | BPSK300 IL2P+CRC | 1000 | **active** |
+| 144.950 MHz | V   | 144.950 FM       | AFSK1200   | 0110 | **active** |
+| 432.675 MHz | V   | 432.675 FM       | AFSK1200   | 0110 | **active** |
+NB- relatively recent NinoTNC firmware required (31 or higher) - see https://github.com/ninocarrillo/flashtnc for easy process.
+NET/ROM enabled on VHF/UHF ports. Please keep nodes broadcasts short.
+Packet mail region #49.GBR.EURO (Oxfordshire)
+Sysop: Martin G6FJI (G6FJI@GB7OXF.#49.GBR.EURO)
+Locator: IO91iq\\
+Lat/lon: 51.68, -1.28
+===== Technical =====
+  * Raspberry Pi 4 + Raspberry Pi OS
+  * LinBPQ
+  * 2x NinoTNC
+  * 1x SignaLink USB
+  * 1x IC-7300 for 40m
+  * 1x Tait T2000 for 2m
+  * 1x FTM-300D for 70cm / 2m
+  * Fence-top dipole for HF NVIS
+  * Diamond V2000 antenna plus MX-72H duplexer