nodes:gb7bex
This is an old revision of the document!
GB7BEX Bexhill, East Sussex
2m packet node with mailbox NoV
Frequency: 144.950 MHz
Packet mail region #38.GBR.EURO
Sysop: G7TAJ
Locator: JO00FU Lat/lon of grid corner: 50.500000, 1.000000
GB7BEX piLINBPQ BBS & Node Switch
Locator : JO00FU, South East UK
Radios:
- IC706MKIIG - HF
- IC706MKIIG - UHF → 2.4Ghz QO100
- Motorola GM350 - 2M
- Motorola GM350 - 2M APRS RX
- Motorola CM140 - UHF 438.000Mhz (on test)
Capability (currently no antennas up)
- 4m
- 6m
- Other HF bands (plans for 10m)
piB
- BBS
- Node
- APRS
- ADSB & AIS Instructions
pi3
- HF QtSM
- HF Ardop
- HF rigcontrol (flrig)
pi4
- QO100 system
- RTLSDR RX with SDRAngel
- QtSM RX/TX
- Monitoring of DXPatrol PA/TX through Arduino
- pilinbpq
- ARDOP
- flrig
Ports under GB7BEX callsign:
- Port 4 144.950Mhz
- Port 5 144.800Mhz APRS - RX only
The following are all HF ports on the dial freq 7.0505Mhz
- Port 6 FX25 300 Baud @1000Hz
- Port 7 ARDOP @ 1500hz
- Port 10 FX25 2000Hz
- Port 11 BPSK300 2500Hz il2p + CRC
Connected nodes of interest:
G7TAJ-3:OAK - QO-100 Satellite
- Port 3 10489.630Mhz @1500 QPSK v26b 2400Baud il2p
- Port 4 10489.630Mhz @1500 BPSK AX25 1200Baud il2p
Mail routes:
RF:
- 2m
- GB7HFD
- G6JME-7
- G0TJH-7
- 70cms
- listening for stations!
QO100:
- EI2GYB
- PE1RRR
- GM8BPQ
HF: (when conditions allow):
- GB7RDG (main forwarding)
- EI9UIB-7
- EI2GYB
- PE1RRR
AX/IP (as a backup to the above)
- GB7YEW
- EI2GYB
- PE1RRR
- GM8BPQ
VHF/UHF Link partners wanted for mail forwarding / linking
QO-100 Screen
HF Screen
nodes/gb7bex.1710516966.txt.gz · Last modified: 2024/03/15 15:36 by g7taj